Products




Providing
Clean Environment

Our product lines are:
· Filtration products ­
Primary Filter | Auto Roll Filter | Secondary Filter | Semi-HEPA, HEPA/ULPA Filter | Disposal Ceiling HEPA/ULPA Module | Room Side Replaceable Ceiling Module | Fan Filter Unit | Chemical Filter & Carbon Filter | Heat Resistance Filter

· Clean room equipment ­
Air shower | Cleanroom Washer and Dryer | Clean Bench | Pass Box | Clean Wagon | Teardrop Lighting | Air Showering Pass Box | Garment Stocker | Bio-Hazard Clean Bench | SS MAC | Pressure Relief Damper | Hospital Isolator Bed System | Clean Partition | Clean Booth | Chair

· Testing ­ IAQ testing, cleanliness and CFU testing, RH, Temperature, Noise level, Lux level, HEPA    leakage test, HEPA velocity test, Cleanroom recovery test etc.


>>Download full products list (PDF)!

Page1

Primary Filter
Model:
1. M-Wash Washable Panel (Detail in PDF)
2. M-DP Disposible (Detail in PDF)

· To trap large particles
· High dust holding capacity / to prolong the life of higher efficiency filters
· Premium performance and construction
· Available in disposable or washable type
· Available with anti-microbial
· Economical in use
· Wide selection of sizes

Auto Roll Filter
· Automatic renewable media air filter
· Differential pressure detector system
· Frame installation
· Simplify structure design
· Act as pre-filtration for air conditioning system
· Ease of maintenance
· High dust holding capacity filter media

(Detail in PDF)
Secondary Filter
Model:
1. M-MV V-Shape (Detail in PDF)
2. M-MI w Separator (Detail in PDF)
3. M-MII w Non-Separator (Detail in PDF)
4. M-Box (Detail in PDF)
5. M-Pack (Detail in PDF)

· Specially designed for areas requiring high level of cleanliness
· Widely used in semiconductor, pharmaceutical, glove and food industry
· A wide range of efficiencies 95%@0.3um to 99.999995%@0.1 ­ 0.2um
· Available in rigid box and panel type / aluminium separator or mini-pleat design
· Available in standard fiberglass, low boron, low outgassing and PTFE media
· All filters are factory tested and certified to meet industry requirement
· Available with FM Approved and UL 900
Semi-HEPA, HEPA/ULPA Filter
Model:
1. M-HI w Separator (Detail in PDF)
2. M-HV V-Shape (Detail in PDF)

· Specially designed for areas requiring high level of cleanliness
· Widely used in semiconductor, pharmaceutical, glove and food industry
· A wide range of efficiencies 95%@0.3um to 99.999995%@0.1 ­ 0.2um
· Available in rigid box and panel type
· Available in aluminium separator or mini-pleat design
· Available in standard fiberglass, low boron, low outgassing and PTFE media
· All filters are factory tested and certified to meet industry requirement
· Available with FM Approved and UL 900

Disposable Ceiling HEPA/ULPA Module
· Control airborne contaminant from ceiling
· Suitable for non-laminar flow cleanroom Class 1,000 to Class 100,000
· Easy replaceable and exchangeable module
· Housing made of light-weighted anodized extruded aluminium
· A wide range of efficiencies 95%@0.3um to 99.9995%@0.1 ­ 0.2um
· Available in fiberglass media
· All filters are factory tested and certified to meet industry requirement
· Available with FM Approved and UL 900
Page1

   Home | About | Products | Services | Career | Contact